Fast defect removal with impressive finishing performance

H3 is a high-performance heavy cut compound developed to remove severe paint defects quickly and efficiently while remaining remarkably easy to use. Capable of removing sanding marks up to P2000 grit, H3 delivers serious cutting power without excessive dusting or difficult wipe-off.

Unlike many traditional compounds, H3 contains no waxes, fillers, or silicone. What you see is exactly what you get, making it ideal for both professional correction work and enthusiasts looking for honest, repeatable results.

Why Choose H3?

Designed to tackle everything from heavy swirl marks and wash marring to sanding marks and severe paint defects, H3 offers the cutting power needed for serious correction work while still producing an impressive finish for a compound of this level.

• Powerful Defect Removal: Quickly removes heavy swirl marks, oxidation, sanding marks, and paint defects.
  
  
• Removes P2000 Sanding Marks: Designed to efficiently eliminate sanding scratches while maintaining excellent control.
  
  
• Impressive Finish Quality: Delivers a surprisingly refined finish for a heavy cut compound.
  
  
• No Fillers or Silicone: Provides true paint correction with no masking or temporary hiding of defects.
  
  
• Low Dust & Easy Wipe-Off: Advanced lubrication technology keeps dusting to a minimum and makes residue removal effortless.
  
  
• Advanced Abrasive Technology: H3 uses a hybrid abrasive system containing both fast-cutting and controlled-breakdown abrasives. Special polymer technology helps manage the abrasive cycle while providing excellent lubrication throughout the polishing process.
  
  The result is a compound that cuts aggressively when needed while remaining easy to work with across a wide range of paint systems.
  
  Whether you're performing a full correction or spot repairing isolated defects, H3 offers professional-level performance with exceptional user friendliness.

Recommended Pads

• Wool Cut Pad
  
  
• Microfiber Slim Ultra Cut Pad
  
  
• Hard Foam Pad

How to Use

1. Prepare the paintwork thoroughly before polishing.
   
   
2. Work in the shade and on cool panels.
   
   
3. Shake the bottle thoroughly before use.
   
   
4. Apply 3-4 drops of H3 to your polishing pad.
   
   
5. Spread the product over an area no larger than 30cm x 30cm using a low machine speed.
   
   
6. Increase machine speed to approximately 5-6 and apply moderate pressure.
   
   
7. Use overlapping passes while moving the machine slowly across the surface.
   
   
8. Make 4-6 passes over the working area.
   
   
9. Wipe away residue and inspect the finish.

Repeat if necessary.

Technical Specifications

• Product Type: Heavy Cut Compound
  
  
• Formula: Water-Based
  
  
• Fillers: None
  
  
• Application: Dual Action & Rotary Polishers
  
  
• Cut Level: Heavy Cut
  
  
• Sanding Mark Removal: Up to P2000
  
  
• Bodyshop Safe: Yes